- 32-bit ARM® Cortex®-M3 Processor
- Embedded DSP engine for touch data preProcessing
- Provide High-Quality Accuracy and Linearity performance on 576 nodes (32×18 electrodes)
- Support up to 6.0 inch diagonal ( 4mm sensor pitch)
- Small finger support down to 1.5mm
- Provide effective Hi-Voltage TX drive for enhancing SNR Performance
- Provide sensing scheme with pseudo random TX frequency
- Adjust Differential Sensing Scheme to filter low frequency noise
- Provide Advanced Median filter for noise cancellation
- Multi touch report rate : Typical 120 Hz depending on the active current and the noise environment
1.产品技术介绍
1.1高性能电容传感
- 32-bit ARM® Cortex®-M3 Processor
- Embedded DSP engine for touch data preProcessing
- Provide High-Quality Accuracy and Linearity performance on 576 nodes (32×18 electrodes)
- Support up to 6.0 inch diagonal ( 4mm sensor pitch)
- Small finger support down to 1.5mm
- Provide effective Hi-Voltage TX drive for enhancing SNR Performance
- Provide sensing scheme with pseudo random TX frequency
- Adjust Differential Sensing Scheme to filter low frequency noise
- Provide Advanced Median filter for noise cancellation
- Multi touch report rate : Typical 120 Hz depending on the active current and the noise environment
1.2嵌入式存储器
- 64KB e-Flash
- 12KB System SRAM
- ISC by serial interface, F/W can be updated in systems
1.3高级的接触性能
- Available for single finger touch tracking without mal-function with water drop or condensation
- Support to thickness glove touch input ( Test condition : 10Φ conducted rod @ 3T Acryl)
1.4低功耗及宽电压供电
- 2.7V to 3.6V supply voltage to VD33
- Active current : Typ. TBD mA @ 120Hz
- Low power current : TBD uA @ 40Hz
- Deep Sleep current : < 3uA @ CE is "LOW"
1.5通信接口及I/O模式
- Available for CE as wake-up function
- Adjust GPIOs to Input Display synchronized Signal for avoiding Display noise
- I2C-compatible for Standard (100kbps) / Fast (400kbps) mode as Slave
- Support 1.65V to 3.6V host communication interface without external level-shifter
- HID over I2C interface for Microsoft® Windows® 8.X and 10